background image

 

 

Overview 

 

Thank you for choosing Hisense Medical Operating Room Monitor, which is applicable to operating 
rooms, interventional radiology rooms, and control rooms. Hisense Medical HME8C58 is an 8M 
high-definition color monitor especially designed for medical imaging application. 

 

Features 

 

Hisense HME8C58 is a 58-inch professional high-definition operating room monitor that supports 
display with 8-megapixel resolution, fully complying with the DICOM standard and meeting the 
high-precision requirements for medical imaging. The monitor features high brightness, high gray 
scale, high resolution, high uniformity, and wide viewing angle. It uses an LED backlight system 
with high reliability and long service life. This ensures stable and consistent display in long-term 
use, restores the original information about medical images, and accurately displays medical 
image details. It is widely used in digital operating rooms and DSA operating rooms, as well as for 
surgical teaching and rebroadcasting, and comprehensive training. 

 

The monitor has multiple I/O ports, supports simultaneous input from multiple signal sources, and 
is designed to support automatic signal source identification. With the built-in Picture by Picture 
(PBP), Picture in Picture (PIP), and Picture Outside Picture (POP) functions, it supports display of 
a maximum of four physical windows, which can facilitate the simultaneous display of different 
image data on one screen during surgery. 

 

The monitor supports adaptive hybrid Gamma calibration and multi-channel independent Gamma 
correction. The Gamma curve in each window can be adjusted independently to match the 
characteristics of the corresponding signal source, so as to meet various display requirements 
during surgery. 

 

The monitor is provided with dual power safety backup design. Seamless switchover between the 
two sets of power supplies ensures real-time processing and high reliability during operation, 
providing failure-free and reliable display. 

 

The monitor does not need a fan for heat dissipation, and therefore meets the high environmental 
standards for sound level and puffballs in the air in hospital operating rooms. The display adopts 
VESA-standard fixing holes, so it can be flexibly installed in operating rooms. 

 

The monitor supports the virtual film clip function to meet the needs of physicians to view films in 
operating rooms. 

 

 

 

Summary of Contents for HME8C58
























Reviews: