Step-by-step installation guide
20
3.
4.
6. Replace the blower plate in the same position.
7. Attach the exhaust adaptor to the rear of the
oven by sliding it into the guides at the top
center of the back of the oven.
Push in securely until it is in the lower Blower
Motor screw.Take care to assure that the
damper hinge is installed so that it is at the
top and that the damper swings freely.
9. Secure the blower plate to the microwave with
screw. Replace the blower plate in the same
position.
8. Secure the blower motor unit to the microwave
with screw as before.
Part“A”
Blower Motor screw
Rotate blower unit counterclockwise 90°.
Before
Rotation
After
5. Place the blower unit back into the opening.
After Fan Blad
Openings Facing Back
End A
End B
Blower plate screw
Blower Motor screw
Blower Plate
Blower Plate
Blower Plate
& Adaptor screw
Adaptor
Adaptor
Adaptor
Back of
Microwave
Back of
Microwave
Back of
Microwave
Guide
Guide
Back of
Microwave
Back of
Microwave
Remove " Parts A " with Nipper or Scissors.
CAUTION:
Do not pull or stretch the blower unit wiring.
Make sure the wires are not pinched.
NOTE:
The blower unit exhaust openings should match
exhaust openings on rear of microwave oven.
