1760mm
at least 75
mm
at least 100mm
W
145°
D
≥
100
W
1
D
1
≥
100
Dimensions
Constant
/mm
Model
HR6BMFF435
HR6BMFF435S
HR6BMFF520
HR6BMFF520S
W
1
W
D
D
1
680
790
525
610
600
600
1315
1425
4
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
Ventilation of appliance
around the appliance for the dissipation of
heat. The diagram on page 4 shows the
recommended space for ventilation of the
refrigerator.
It is advisable to leave at least 75mm of
space from the back to the wall, at least
100mm from its top and a clear space
upfront, at least 100mm from its side to the
wall.
When positioned in a corner area, spacing
of enough clearance area (at least W1) on
the hinge side will allow the doors to open
enough to enable the removal of drawers
and shelves.
Installing your new appliance
It's essential to find a suitable place
to locate your new appliance to
ensure its efficient operation.
Location of appliance
Choose a location for your appliance that
isn't too cold or too hot. The best range of
temperature is 10°C~43°C.
Stand your appliance in a dry place to avoid
high moisture. Don't put the appliance in
frosty or unprotected areas.
Keep the appliance out of direct sunlight or
rain. Stand the appliance away from heat
sources such as stoves, fires or heaters.
1.
2.
3.
4.
Levelling the appliance
The appliance should be level in order to
eliminate vibration. We recommend that you
level the appliance.
Roll the refrigerator into place.
Turn the adjustable feet (with your fingers
or a suitable spanner) until it touches the
floor.
Tilt back the top backwards for about 10-
15 mm by turn the feet 1-2 turn further.
This will allow the doors to self-close,
providing a consistent closed seal.
Whenever you want to move the
appliance, remember to turn the feet back
up so that the appliance can roll freely.
Reinstall the appliance when relocating.
Caution!
The rollers, which are not castors,
should be only used for forward or backward
movement. Moving the refrigerator sideways
may damage your floor and the rollers.
