7
r
Installing Your New Appliance
Before using the appliance for the first time, you
should be informed of the following tips.
A
Warning!
For proper installation, this refrigerator must be
placed on a level surface of hard material that
is the same height as the rest of the flooring. This
surface should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors, should be only
used for forward or backward movement.
Moving the refrigerator sideways may damage
your floor and the rollers.
111111
Q)
0
�
....
A
Ventilating the Appliance
In order to improve efficiency of the
cooling system and save energy, it is necessary
to maintain good ventilation around the
appliance for the dissipation of heat. For this
reason, sufficient clear space should be
available around the refrigerator.
Suggestion
It is advisable for there to be at least 3 inches
(75mm) of clearance from the back of the
fridge to the wall, at least 3.9 inches (100mm)
of clearance from its top, at least 3.9 inches
(100mm) from its side to the wall and a clear
space in front to allow the doors to open 125 °.
As shown in following diagrams.
A
58.l n(l476mm )
B
30.7 n(779mm )
C
29. 5
n
(750mm)
D
47. 3 n(l 201 mm)
A
3,05mm)
,3.9'(100mm)
'""•�::;::'.====:=::::--,-.
3.9 • ( ioornrn)
C
B
D
Note:
E
E
0
0-
-0
' "'
-0
-0
• This appliance performs well with ambient
temperature between 55°F (12. a·c) to 110°F
(43. 3"C)I, The appliance may not work
properly if left at a temperature above or
below the indicated range.
•Stand your appliance in a dry place to
avoid high moisture.
• Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away from
heat sources such as stoves, fires or heaters.
