The side at which the door opens can be changed,
from the right side (as supplied) to the left side, if
required.
Reversing The Door
The tools you will need (Not provided):
•The proper storage of wine depends on its age, type
of grapes, alcoholic content and level of fructose and
tannin contained in it. At the time of purchase, check
if the wine is already aged or if it will improve over time.
Note:
If required you may lay the refrigerator on its
back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to avoid damaging the backboard of the
refrigerator. To reverse the door, the following steps
are generally recommended.
1.Stand the wine cooler upright, close the door, use a
putty knife or thin-blade screwdriver to pry off the screw
hole cover which is at the top left corner of the cooler,
and unscrew the special flange screws which are
used for fixing the right upper hinge part by a 8mm
socket driver or a spanner (please support the upper
door with your hand when doing it).
WARNING
When reversing the door, the appliance
must not be connected to power.
Ensure that the plug is removed from the
power socket.
Not provided
8mm socket wrench
Phillips head screwdriver
Thin-blade Screwdriver
Adjustable Wrench
Putty knife
8mm wrench
12
2. Move the door from the hinge by carefully lifting
the door straight up.
Note:
When removing the door, watch for washer(s)
between the hinge and the bottom of the upper
door that may stick to the door. Do not lose these
washers.
3. Unscrew the grille cover fixing screws then lifting up
and pulling backwards, take the grille cover offthe
cabinet.
Note: Take care of the screws. Record the screw’s
place of ues and quantity.
2 screws here
The parts you will need (provided )
Bottom left hinge
Screw hole cover (right)
Top left axle hole part
