background image

RZA-0-1000-862-SM-D

Compact Size

      This model is smaller than its predecessors and    
      yet offers the same capabilities.

Microprocessor Controlled Operation

    The interior compartment of the remote control 

unit contains several features to facilitate 
automatic operation, clearly displayed for easy 
use.

Simple One-touch Wireless Remote Control

    The remote control unit has several features to 

facilitate automatic operation.

12-Hour ON or OFF Timer

    This timer can be set to automatically turn the 

unit on or off at any time within a 12-hour period.

1-Hour OFF Timer

   This timer can be set to automatically turn off      

the unit after one hour.

Night Setback

     Pressing this SLEEP button changes the setting 

of the room temperature thermostat, allowing 
you to set the temperature at whatever level 
that you feel comfortable.

Automatic and 3-step Fan Speed

Auto/High/Medium/Low

       

 

Air Sweep Control
      

This function moves a flap up and down in the air

 outlet, directing air in a sweeping motion around   

       the room and providing comfort in every corner.

Automatic Switching between Cooling and 
Heating

     This unit automatically switches between cooling 

operation and heating operation according to 
the difference between the room temperature 
and the set temperature.

Hot start Heating System

  Right from the start, the air is warm and 

comfortable. This system prevents any cold 
blasts at the beginning while the heat pump 
warming up, or even defrosting.

Automatic Restart Function for Power Failure

    E v e n   w h e n  p o w e r   f a i l u r e  o c c u r s ,   p r e s e t 

programmed operation can be reactivated once 
power resumes.

Anti-Mold Filter

     This unit is equipped with an anti-mold filter that 

inhibits the growth of mold and bacteria.

High Power Running

  Run with strong power and make you feel 

comfortable quickly.

This air conditioner provides with cooling, heating, and drying functions. Details of the functions are below; refer to 
these descriptions when using the air conditioner.

Summary of Contents for KFR 2101GWE
























Reviews: