10
ADJUST THE UPPER-RIGHT CORNER OF THE IMAGE
1. If the top of the image is lower on the left and higher on
the right, then use the wrench to rotate the back-right foot
clockwise so that the bottom of the image is also higher
on the right. The upper-right corner will expand further by
default. Make sure part of the image is displayed beyond the
upper-right corner of the screen.
2. Now, rotate the TV counterclockwise so that the bottom of
the image is parallel with the screen.
• If the bottom of the image is wider than the screen, then
move the Laser TV closer to the screen.
If the bottom of the image is narrower than the screen, then
move the Laser TV farther from the screen.
NOTE: Make sure the bottom of the image always stays
parallel with the screen. If not, rotate the TV following previous
instructions.
back-right foot
Summary of Contents for Laser TV
Page 1: ...ES A18A101 1 ...