background image

17

The picture is normal but there is no sound
1.  Check the volume settings.
2.  Check if 'Mute' mode is set to On.

Sound but no picture or black and white picture
1.  If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.
2.  Check that the Color is set to 50 or higher. 
3.  Try different TV channels.

The sound and/or picture is distorted or appears wavy
1.  An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away from the TV.
2.  Insert the power plug of the TV set into another power outlet.

The sound and picture is blurry or cuts out
1.  If using an external antenna, check the direction, position and connection of the antenna.
2.  Adjust the direction of your antenna or reset or fine tune the channel.

The plastic cabinet makes a "clicking" type of sound
The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or 
contract, which makes the sound. This is normal and the TV is OK.

The remote control does not work
1.  Confirm that TV still has power and is operational.
2.  Change the batteries in the remote control.
3.  Check if the batteries are correctly installed.

Summary of Contents for Laser TV





























Reviews: