Hisense LMS016M6RBE, User'S Operation Manual

5FNQFSBUVSF

c

POUSPM

 -

LMS016M6RBE

Remove all food.
Unplug the power cord.
Clean and dry thoroughly.
Leave the door open slightly to
prevent 

odor and mold

 growth .

1

0

Insert the plug of the connection lead
into an outlet with protective 

ground

contact.
The temperature selector knob is located 
on the right side of the fridge.

7HPSHUDWXUH
&RQWURO

Setting OFF means

Turning the temperature control “OFF”

position stops the cooling cycle, but

does not shut off the power to the

refrigerator.

Turn the knob clockwise to turn the

refrigerating unit on. Coldest setting is

all the way to “MAX” position. The unit

operates automatically at the set

position. If the unit is unplugged , power

lost, or turned off, you must wait 3 to

5 minutes before restarting the unit. If

you attempt to restart before this time

delay, the refrigerator will not start.

Setting MIN means:

Highest temperature, warmest setting.

Setting MAX means:

Lowest temperature, coldest setting.

^ĞƚƚŝŶŐD

/

ŵĞĂŶƐ͗

DŝĚĚůĞƚĞŵƉĞƌĂƚƵƌĞ͕ŵŝĚĚůĞƐĞƚƚŝŶŐ͘

Suggestion: What to do when in 

use for a long period of time and 

an evaporator banging sound is 

heard

During use, the sound of ice cracking

is caused by thermal expansion and 

cold contraction, which is a normal

phenomenon.You can manually adjust

the knob of the temperature controller

to 

OFF

, and then adjust to the 

appropriate

gear until there is no water 

bead

attached on the evaporator.

       IMPORTANT !

It is recommended to use the “MID” 

setting. If warmer or colder temperature 

is desired, please turn the knob to a 

lower or higher setting.

Though the unit is energy efficient, it is
more efficient at lower position

settings.

IMPORTANT !

High ambient temperatures (e.g. on
hot summer days) and a cold setting on
the temperature regulator (position 
“MAX” ) can cause the compressor to 

run continuously or even 

non-stop. 

When  the  refrigerator  is  in  use,  the 

compressor needs to be turned on and 

off  to  ensure  its  properly  defrosting. 

Therefore, it is advised to avoid setting 

the refrigerator’s notch to high (MAX). If 

the  refrigerator  frosts  too  much,  make 

sure to set the refrigerator’s notch to a 

lower setting.

Vacation Tips: lf the appliance
will not be used for several 

months

：