Installing
your
new
appliance
Ventilation
of
appliance
●
●
Before using the appliance for the first
time, you should be informed of the
following tips.
In order to improve efficiency
of the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
It is advisable for there to be at least
75mm of space from the back to the
wall, at least 100mm from its
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 145°,as shown in
following diagrams.
Do not use electrical appliances such
as ice cream makers inside the food
storage compartments of the appliance,
unless they are approved by the
manufacturer.
Do not look direct into the LED light
located in the refrigerator compartment
without optical instruments to avoid eye
injuries. If it is not functioning correctly,
consult a
qualified, registered
electrician or replace it in accordance
with the “Cleaning and Care” chapter.
1760mm
75mm
100mm
4
Hisense Refrigerator
●
●
●
●
Switch off the appliance and disconnect
it from the mains power before you clean
or move it.
Never unplug the appliance by pulling
on the electrical cord. Always grip the
plug
firmly and pull straight out from
the socket
to prevent damaging the
power cord.
Do not operate the appliance without
the light cover of interior lighting.
Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service engineer.
Only genuine spares should be used.
100mm
