11
install it on the reverse hole site, and
tighten into position (change it into lower
hinge-left) . Remove the lower hinge-left to
the left-bottom corner of cabinet, Then fix
it with 3 screws, finally install part
④
on
the left-bottom corner and right-bottom
corner of cabinet.
11. Stand the refrigerator upright and
●
carefully slot the lower door onto the lower
hinge-left pin and hold it in position.
Install middle hinge-left (provided in the
plastic
●
accessory bag) and ensure the
lower door in place.
12. Carefully slot the upper door onto the
middle hinge pin and hold in position.
Move the upper door to an appropriate
position, adjust the upper hinge-left
(provided in the plastic accessory bag)
and upper door, then fit the hinge pin into
the hinge hole at the top of the upper door
to secure it in place. Then fix the upper
hinge part with screws (Please carefully
hold the upper door by hand when
installing)
13. Install the temperature sensor part on
the upper hinge cover-left (provided in the
plastic accessory bag). Assemble the
upper hinge cover-left to match the hinge.
Install the door racks to original position.
Keep the upper hinge cover-right with the
appliance for future reference.