8
Leveling of appliance
For sufficient leveling and air circulating in
the lower rear section of the appliance, the
bottom feet may need to be adjusted. You
can adjust them manually by hand or by
using a suitable spanner.
To allow the doors to self-close, tilt the top
backwards by 10-15mm.
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied) to
the left side if required.
Warning! When reversing the door,
●
the
appliance must not be connected to the
Power, Ensure that the plug is removed from
the power socket.
Not provided
Wrench(8mm)
Philips Screwdriver
Thin-blade
screwdriver
Monkey wrench
Additional parts (in the plastic bag)
Allen Wrench(4mm)
Upper Hinge-Left
Upper Hinge Cover-
left
Screw Hole Cover-
right
Middle Hinge-left
Stop Block-left *2
Door Stopper-left *2