background image

Hisense Refrigerator

hinge

 

cover

self

-

tapping

 

screw

upper

 

hinge

 

parts

upper

 

hinge

⑤ 

gasket

hinge

 

axle

 

10

3.  Loosen the hinge axle 

 

with monkey wrench and 
change it to the reverse 
hole site , and then  tighten 
into position. Take down the 
gasket 

 and change it to 

the reverse hole site .

④ 

4. Remove screw cover 
from the left-front corner of 
cabinet with thin-blade 
screwdriver and install it to 
the right-front corner.

Caution!

 Please hold the 

upper door in place during 
step 3 to prevent the door 
dropping.

6. Place the upper door on a 
smooth surface with its panel 
upwards. Loose screw 

③ 

nd take down part 

② 

nd 

part 

①, 

Install replacement 

door  stopper-left 

④ 

provided (in the plastic bag) 
and part 

②(

stop block) to 

the left side with screw

③. 

Keep part 

① 

with the 

appliance for future 
reference.

a

a

  Door

 

stopper 

 

 

  Self-tapping screw

  Stop block

2. Remove right upper 
hinge cover 

 

and take down the 

upper hinge parts

 

on top of the 

cabinet.remove the 3 
screws

 which are used 

for fixing  the right upper 
hinge part  (see the picture 
below)

5.  Remove  the  upper  door 
from  the  middle  hinge  by 
carefully  lifting  the  door 
straight up.

Summary of Contents for RB335N4WB1




























Reviews: