Do not place warm foods into the
appliance. Allow warm foods to cool
first. Do not install the appliance
near cookers, radiators or other
sources of warmth. High ambient
temperatures cause longer, more
frequent operation of the compressor.
In order to make the cooling system
work efficiently, please make sure
the side plates and back plate of the
product are with some distance from
the wall. It is strongly recommended
that its back is 75 mm (3 inch) away
from the wall, its sides are at least
have a space of 100 mm (4 inch)
separately and the height from over its
top is no less than 100 mm (4 inch) .
When the product works, please do
not open the door too often or leave
the door open any longer than
necessary.
Do not set temperature any colder
than necessary.
The direct cooling refrigerator (with
a freezer) needs to be defrosted
when necessary. This will improve
the cold transfer and reduce energy
consumption.
The sketch map shows the right
combination of the shelves which
can lead to more energy efficiency.
If users adjust the combination, it
may result in more
energy-consumption.
Store food logically. Do not exceed
the storage period specified.
Correcting Malfunctions
A malfunction may be caused by only a
minor fault that you can rectify yourself
using the following instructions. Do not
perform any other work on the
appliance if the following information
does not provide assistance in your
specific case.
Please keep upright at least 2 hours
before use to prevent damage of
compressor.
IMPORTANT!
Repairs to refrigerators/freezers should
only be performed by qualified service
technician. Improper repairs can give
rise to significant hazards for the user.
If your appliance needs repairing,
please contact your specialist dealer or
your local Service Center.
&OFSHZ4BWJOH5JQT
5SPVCMF4IPPUJOH
9
9
Summary of Contents for RC33
Page 25: ......
