15
Push the appropriate ice or water type
button to select what you want to dispense.
Getting Cold Water and Ice
Getting Cold Water
The water dispenser is located in the fridge
door. To get water, push the water button.
Then move your glass down to the
dispenser lever (A) at below suggested
position and press it.
Getting Cubed & Crushed Ice
To get ice, push the cubed or crushed ice
button as required. Then move your
glass down to the dispenser lever(A)
at below suggested position and press it.
WARINING
If a power failure occurs, ice cubes may
melt and then freeze logether when the
power comes back on, causing the
dispenser to stop working. To prevent
this problem, after a power failure, pull
out the ice bucket and residual ice or
water.
Don't push the water dispenser lever
forward without a cup below since it
may cause water spilling.
Ice Maker in Refrigerator
To turn off the Ice Maker
Press the
"
Ice Off
"
button to turn off the
ice maker, the
" "
icon will light up.
And you need to remove all ice cubes
from the ice bucket. If not, the ice cubes
may clump together, making it difficult
to remove them.
Press "Ice Off" Button to turn the ice maker
On and Off. The Ice Off icon " " is off
when the ice maker is functioning.
Following installation, allow 24 hours to
produce the first batch of ice. Discard
the first three batches of ice produced.
Allow 2 to 3 days to fill the ice storage
container.
If the ice in the ice container clumps or
sticks t the wall, break up ice using a
plastic utensil and discard. Do not use
a sharp tool to break up the ice. This can
cause damage to the ice container.
Do not store any items other than ice in
the ice storage container.
If the ice sticks to the wall, break the ice
cubes with plastic utensils and discard.
Removing/Replacing freezer
drawer
NOTE:
Unscrew the drawer before taking it out.
1. Pull out drawer to maximum extension.
2. Lift up to remove the drawer.
3. Reverse steps 1 and 2 to replace the drawer.
Summary of Contents for RF200D4CSE
Page 49: ......
