Hisense RL170D4BC2, User'S Operation Manual

1.
be lengthened.
2. Make sure that the power 
plug is not 

 or 

damaged. A 

or 

damaged power plug may 
overheat and cause a fire.
3. Make sure that you can 

 plug of the 

appliance.
4. Do not pull the main 
cable.
5. If the power plug socket 
is loose, do not insert the 
power plug. There is a risk 
of electric shock or fire.
6.You must not operate 
theappliance without the 
interior lighting lamp cover.
7.The fridge is only applied 
with power supply of single 
phase alternating current of 
220~240V/50Hz. If 
fluctuation of voltage in the 
district of user is so large 
that the voltage exceeds the 
above scope, for safety 
sake, be sure to apply A.C. 
Automatic voltage regulator 
of more than 350W to the 
fridge. The fridge must 
employ a special power

The power cord must not 

crushed

crushed 

access the main

Electrical safety

 blowing gas are 

flammable. When 
disposing of the appliance, 
do so only at an authorized 
waste disposal centre. Do 
not expose to flame.

The refrigerant isobutene 
(R600a) is contained withi

n 

the refrigerant circuit of the 
appliance, a natural gas 
with a high level of 
environmental 
compatibility, which is 
nevertheless flammable. 
During transportation and 
installation of the 
appliance, ensure that 
none of the components of 
the refrigerant circuit 
becomes damaged.
The refrigerant (R600a) is 
flammable.

Refrigerant

If the refrigerant circuit 
should be damaged:
-Avoid opening flames and 
sources of ignition.
-Thoroughly ventilate the 
room in which the 
appliance is situated.
It is dangerous to alter the 
specifications or modify 
this product in any way. 
Any damage to the cord 
may cause a shortcircuit,

Caution:risk of fire

fire, and/or electric shock.

4