Hisense Refrigerator
Increase the temperature by following the “Display
controls” chapter.
Check whether the top of the refrigerator is tilted back
by 10-15mm to allow the doors to self close, or if
something inside is preventing the doors from closing.
The water pan (located at the rear bottom of the
cabinet) may not be properly leveled, or the draining
spout
（
located underneath the top of the compressor
depot
）
m
ay not be properly positioned to direct water
into this pan, or the water spout is blocked. You may
need to pull the refrigerator away from the wall to check
the pan and spout.
The LED light may be damaged. Refer to replace
LED lights in cleaning and care chapter.
The control system has disabled the lights due to the
door being kept open too long, close and reopens the
door to reactivate the lights.
●
●
Temperature inside
is too cold
Doors
can't
be
closed easily
Water drips on the
floor
The light is not
working
19
Temperature inside
is too warm
You may have left the doors open too long or too frequently;
or the doors are kept open by some obstacle; or the
appliance is located with insufficient clearance at the sides,
back and top.
A layer of frost
occurs
in
the
compartment
Check that the air outlets are not blocked by food and
ensure food is placed within the appliance to allow sufficient
ventilation. Ensure that door is fully closed. To remove the
frost, please refer to cleaning and care chapter.
