Hisense RQ22N6ASD, Use & Care Manual

Replacing the LED light

CAUTION! 

Only after the door seals are  

completely dry should the 

appliance be powered on.

WARNING! 

The LED light must be replaced by 

a competent person. If the LED  

light is damaged, follow the steps 

below:

1. Unplug your appliance.

2. Remove the light cover by

lifting up and pulling out.

3. Hold the LED light with one hand

and pull it while pressing the

connector latch with the other

hand.

4. Replace the LED light and snap

it correctly in place and replace

the light cover.

Door

seal

cleaning

Take

care

to

kee

p

the

door

seals

clean.

Sticky

food

and

drinks

can

cause

seals

to

stick

to

the

cabinet

and

tear

when

you

open

the

door.

Wash

seal

with

a

mild

detergent

and

warm

water.

Rinse

and

dry

it

thoroughly

after

cleaning.

Helpful Hints and Tips

Energy Saving Tips

We recommend that you follow the tips 

below to save energy.

Don’t set the temperature colder than 

necessary.
Don’t store warm food or evaporating 

liquid in the appliance.

If the diagram shows the correct 

combination for the drawers, crisper and 

shelves, do not adjust the combination as 

this is designed to be the most energy 

efficient configuration.

Avoid

keeping

the

door

open

for

long

periods

in

order

to

conserve

energy.

Ensure

the

appliance

is

away

from

any

sources

of

heat

(direct

sunlight,

electric

oven

or

cooker

etc.)

Place

the

appliance

in

a

well

ventilated,

h

umidity

freeroom.

Please

refer

to

the

I

nstalling

your

New

Appliance

c

hapter.

Hints for fresh food refrigeration

Do not place hot food directly into the 

refrigerator or freezer, the internal 

temperature will increase resulting in the 

compressor having to work harder and 

consume more energy.
Do cover or wrap the food, particularly if it 

has a strong flavor.
Place food properly so that air can 

circulate freely around it.

15