Hisense RQ22N6ASD, Use & Care Manual

Connect Water Line to Refrigerator

IMPROTANT:

2.
3.

4.

5.

If you turn the refrigerator on

before the water is connected,turn off the

ice maker.

Unplug refrigerator or disconnect power.
Close shutoff value.

Thread a 1/4 " compression nut and ferrule

(sleeve) onto the free end and of 1/4"

Insert the free and of the 1/4" water line

water line.

into the brass fitting attached to the water

inlet on the back of the refrigerator.

a b c

Ferrule (Sleeve) -1 pcs

1/4" Compression Nut - 1 pcs

1/4" Water Line - 1 pcs

a

b

c

e

d

c

1/4" Water Line
1/4" Compression 

Nut
Ferrule(Sleeve) 
Brass Fitting
Water Inlet

Slide the 1/4" compression nut over the
ferrule (sleeve) and screw the 1/4" 

compression nut onto the brass ftting.

6.

7. Comfirm 1/4" water line is secure by gently 

 pulling on it.

8. Turn on water supply and check for leaks.

Correct any leaks

a

b

c

d 

e 

a

b

Note:

Ensure that the water line does not get 

pinched or bent when installing. 

This can result in improper water flow 

through the line and will affect the 

functionality of the fridge.

Clip

Water line

Water line

Coupler

5.

Connect

the

extension

tubing

line

with

the

line

on

the

back

of

the

fridge

via

the

coupler.

Fully

insert

the

extension

tubing

into

the

coupler,

and

then

insert

the

clip

onto

the

coupler

to

lock

in

the

tubing.

Do

the

same

with

the

other

end.

After

both

clips

are

inserted,

check

the

line

to

make

sure

it

is

held

firmly

by

the

clips.

6. Turn the water on and check

for leakage.

Note:
Use only the new tubing supplied with the

refrigerator. Old tubing should not be used.
After connected to the water supply line,

please open the water valve to flush the

filter for 5 minutes before use.

The initial dark discoloration of water is

normal.

The water line must be connected to the

cold water pipe. If it is connected to the

hot water pipe, it may cause the purifier

to malfunction.

Avoid contamination of pipes during

installation.

Connect to potable water supply only.

WARNING!

1. You may need to purchase below items

to complete this connection. And you

may find these items sold as a kit at a

local hardware store.

8