Warning!
Don’t touch the other parts of the
appliance when filling water, it may
cause the water leakage.
Dispensing water
1.Make sure the cover of the water tank
is fitted on.
2.Close the fridge door and check the
dispenser.
Before you dispense the water, make
sure the lock device is on the “Unlock”
Warning!
The lock is defined as “child lock”.
Don’t push the dispenser lever forward
strongly, when the dispenser is on “Lock”
situation, it may damage the mechanism.
Receiving Water
You should use the correct cups to receive
water underneath the water dispenser.
Caution!
Fill with water up to 4L ( which is
suggested) and not above the level.
Otherwise, it may overflow when the lids
We recommend that you fill the water by
the following ways.
1.Remove the small lid and fill water from
the inlet of the larger lid.
2.Remove the cover of the rank, and then
fill water inside directly.
is closed.
appliance, you should dry it fully.
Also
clear the receiving tank to
regularly
Warning!
Don’t push the dispenser lever forward
without cup, it may cause the water leakage
from the dispenser.
Cleaning
1.Put the water tank out of the door
carefully and then wash the tank, lid, and
head lightly in water.
2.After you have successfully cleaned the
avoid slillage .
.
situation.
14
