Hisense RT33D6AAE, Owner'S Manual

The side at which the door opens can be 

changed from the right side (as supplied) to 

the left side, if the installation site requires. 

Tools you will need:

.

 8mm socket driver

.

 cross-shaped screwdriver

Note: Before this step, you should lay the refrigerator 
on it’s back in order to gain access to the base, you 
should rest it on soft foam packaging or similar 
material to avoid damaging the cooling pipes at the 
rear of the refrigerator.

.

 Putty knife or thin-blade screwdriver

2. open the screw hole cove and the upper 
hinge cover which is at the top right corner of 
the refrigerator.

upper hinge 
cover (right)

1. Stand the refrigerator, open the upper 
door and remove the things in the door and 
close it.  

3.Unscrew the special flange self-tapping 
screws which are used for fixing the right 
upper hinge part by a 8mm socket driver 
or a spanner(please support the upper 
door with your hand when doing it ).

right upper hinge part

special flange 
selftapping screws

5.Remove upper door and place it on 
smooth surface with panel upwards.

6. Loose screws used to fix middle hinge 
and remove middle hinge. Then turn middle 
hinge by 180. Take washer on axis and put 
it on another end. Place it well for use.

7. Remove lower door and place panel 
upwards on smooth surface.  

8. Change screw hole covers on middle 
cover plate from left to right (as shown in 
figure below).

Front

foot

fixed

board

Self tapping

screws

Adjustable

bottom feet

part

Lower

hinge

part

ΰ

right

α

9. Use the 

S c r e w   o u t   l o w e r  

8mm 

s o c k e t   d r i v e r   t o  
remove  lower hinge 
part and front foot 
fixed board. Then 

4.Remove the right upper hinge part and 

,

 the 

screw hole cover  place them on 

smooth surface. 

Note: washer may
stick to lower door.

washer

A j

d ustable bottom feet 

screw hole cover

.

 7mm wrench

Caution

㧦

To

avoid to injury yourself and/or property, 

we recommend someone assist you during 
the door reversal process.
.Ensure the Appliance is unplugged and 
empty.
.Following

steps

are

generally 

recommended

and adjustable bottom feet, change it to the near 
hole site, and then screw up and mount washer.

Changing the door from the right side to the left.