31
Import parameter: Import the configuration file from the SD card to the device, which can
simplify the manual configuration of parameters for multiple devices that need the same settings.
Reset: restore configuration parameters to factory settings.
Export log: Export device log to SD card
7.4 Equipment Management
For the settings of external devices connected through the serial port, the sub-menu includes: PTZ,
serial port management, and other peripherals.
7.4.1 PTZ
Protocol type: Currently only two protocols are supported: PELCO-D/PELCO-P. Set the baud rate,
data bit, stop bit, parity, and address of the PTZ according to the specific PTZ.
After setting the PTZ parameters, return to the direct screen, switch to the channel of the PTZ
screen, and press the [F2] on the remote control to enter the PTZ control.
7.4.2 Serial Port Management
1*RS232 and 1*RS485 serial port connect peripheral parameter configuration.
