MAINTENANCE AND ADJUSTMENT OF THE UTV
- 93 -
or explosion.
b. Squeeze the excess solvent out of the
element and let it dry.
NOTE
:
Do not twist or wring out the element. This
could damage the foam material.
c. Squeeze out the excess oil.
NOTE
:
The element should be wet but not dripping.
4. Install:
·
air filter element
·
air filter case cover
NOTE
:
To prevent air leaks make sure that the
sealing surface of the element matches the
sealing surface of the case.
·
console
·
driver seat
·
lower the cargo bed
CHECKING THE COOLANT LEVEL
1. Place the vehicle on a level surface.
2. Remove front faceplate.
3. Check:
·
start the engine, warm it up for several minutes,
and then turn it off.
·
coolant level
NOTE
:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
·
coolant level
The coolant level should be between the
minimum level mark
②
and maximum level
mark
③
.Below the minimum level mark
Add the recommended coolant to the proper
level.
