Periodic Service
10-7
①
Range gear shift lever pivot (spray type grease )
■
Checking engine start system
CAUTION
TO avoid personal injury
Do not allow anyone near the vehicle
while testing.
If the vehicle does not pass the test,
do not operate the vehicle.
◆
Preparation before testing
1. Place all control levers in the
“NEUTRAL” position.
2. Set the parking brake and stop the
engine.
◆
Test gear shift range lever safety
switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “L”,
“H”, “N” or REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for
this service.
Bench seat
①
Range gear shift lever
Bucket seat
①
Range gear shift lever
■
Checking wheel bolt torque
CAUTION
To avoid personal injury
Never operate vehicle with a loose wheel
bolts.
Any time these bolts are loosened they
should be retightened to the specified
torque.
Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when new
if they are loose tighten them as follows:
Summary of Contents for 550UTV/HS
