Operating the Vehicle
8-4
3. Select proper gear and engine speed
depending on the type of job.
4. Before exiting vehicle, shift the gear shift
lever to the “NEUTRAL” position and set
parking brake.
FOR HS400UTV-4
①
Range gear shift lever
(F) FRONT Range
(N) NEUTRAL” POSITION
(R) “REVEREE”
FOR HS450UTV
①
Range gear shift lever
(L) LOW Range
(H) HIGH Range
(N) NEUTRAL” POSITION
(R) “REVEREE”
NOTE:
When range gear shift lever is hard to
engage, do not force the lever. Set the
parking brake, slightly depress the
accelerator pedal and release it to neutral
position, then shift the lever.
When the lever is hard to disengage, do not
force the lever.
Depress the brake pedal fully, then shift the
lever. Damage may occur with wrong
shifting operation.
■
4WD Lever
CAUTION:
To avoid personal injury:
when traveling at road speed. Use only
2WD.
When driving on icy, wet or loose
surfaces, make sure the vehicle is
correctly loaded to avoid skidding and
loss of steering control. Reduce the
speed and engage front wheel drive.
Accident may occur if the vehicle is
suddenly braked, such as heavy towed
loads shifting forward causing loss of
control.
The braking characteristics are different
between two and four wheel drive. Be
aware of the difference and operate
carefully.
IMPORTANT:
5. Unlock the parking brake and start slowly.
To release the parking brake, depress the brake
pedal. Make sure that indicator in the display
goes off.
Summary of Contents for HS 400-4
