Periodic Service
10-6
①
Parking brake
■
Checking gauges meter and easy checker™
lamps
1. Inspect the instrument panel for broken
gauges meter and warning lamps.
2. Replace
if
broken.
■
Checking head light turn signal light etc
1. Inspect lights for broken bulbs and lenses
2. Replace
if
broken
■
Checking seat belt and ROPS
1. Always check condition of seat belt and
ROPS attaching hardware before operating
vehicle.
2. Replace if damaged.
■
Checking joint boot
1. Check to see if the joint boots are damaged
or not.
2. If the boots are cut crashed or show signs of
deterioration. consult your local dealer.
①
Joint boot
②
Drive shaft
■
Checking tire inflation pressure
Though the tire pressure is factory-set to the
prescribed level, it naturally drops slowly in the
course of time, thus check it every day and
inflate as necessary.
tire sizes
inflation pressure
Front: 25x8-12
70kPa (0.7kgf/cm2, 10psi)
Rear: 25x10-12
70kPa (0.7kgf/cm2, 10psi)
EVERY 50 HOURS
■
Greasing
Apply a small amount of multi-purpose grease
to the following points every 50 hours. If you
operated the vehicle in extremely wet and
muddy conditions lubricate grease fittings more
often.
①
Parking brake
②
Parking brake pivot
(
spray type grease
)
Summary of Contents for HS 400-4
