Periodic Service
10-8
Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when new
if they are loose tighten them as follows:
①
Torque wheel bolts to 75
to 90 N.m
■
Cleaning air cleaner primary element
1. Remove the air cleaner cover and primary
element.
2. Remove the sponge material from its frame.
3. Wash the sponge material gently but
thoroughly in solvent.
4. Squeeze the excess solvent out of the
sponge material and let it dry.
5. Inspect the sponge material and replace it if
damaged.
6. Thoroughly apply foam air filter oil or other
quality liquid foam air filter oil (not spray type)
to the sponge material.
7. Re-install the air filter element.
8.
Install the air filter case cover and be sure the
crankcase breather hose is connected.
①
Air filter element
①
Air filter element
②
Locating pad
①
Mounting point
②
Air filter case cover
IMPORTANT
The air cleaner uses a dry element never
apply oil.
Do not run the engine with filter element
removed.
Summary of Contents for HS 400-4
