Periodic Maintenance and Adjustment 8-53
Table 3:
Solution of Common Problems in Electrical System
S/N
Problems Solutions
1. Check if the headlight switch functions properly.
2. Check if the wires are broken.
1
Lights do not work.
3. Check if the lamps or bulbs are broken.
1. Check if the control switch on meter board works well.
2. Check if the differential lock control magneto plug in rear
bridge reduction gear box is broken.
2
Vehicle cannot go into 4
wheel drive mode.
3. Check if the wire is broken.
1. Check if the control switch on meter board works well.
2. Check if the differential lock control magneto plug in rear
bridge reduction gear box is broken.
3
Rear differential will not
work.
3. Check if the wire is broken.
1. Check if the sensor is broken.
2. Check if the meter is broken.
4
Meter display is not
normal.
3. Check if the surface of speed sensor is contaminated with
iron dust.
1. Check if the switch is broken.
2. Check if the wire is broken.
5
Start switch on meter
board will not work.
3. Check if the ECU in electrical injection system is broken
.
Summary of Contents for HS500UTV
