General
2-6
Parking
1. Set
the gear shift to the “N” position and pull
the braking brake to the top position to park
the vehicle.
2. Avoid stopping the vehicle on a slope. If
stopping on a slope make sure the vehicle is
stationary before exiting.
①
Parking Brake foot lever
.
Transportation
1. Avoid dragging the vehicle behind another
vehicle. Use a trailer or truck to transport the
vehicle.
2. When loading or unloading, pay attention to
your surroundings and others in the area.
Maintenance
Stop the vehicle and park it on level ground. Pull
the parking brake and remove all cargo. Place
the shift lever in the “N” position, stop the engine
and remove the key.
1. When working next to the engine, exhaust,
or radiator, work only after it has cooled
down.
2. Wait for the engine to stop running and cool
down before checking the coolant level.
Otherwise, you could be burned by hot fluid
or steam.
3. No smoking when adding electrolyte or
refueling. Fuel tank and battery should be
kept away from sparks. Battery produces
hydrogen and oxygen in charging and this
could accelerate the risk of explosion.
4. Read and follow the instructions before
replacing the battery.
5. During maintenance, first aid kits and fire
extinguishers should be placed at your
fingertips.
6. During maintenance, you should disconnect
the battery cables.
①
Battery
7. Do not open radiator cap before coolant
has cooled down. Open the cap slowly and
let the coolant pressure reduce, and then
open the radiator cap fully to remove.
Check for the coolant level in the coolant
reservoir. If necessary, add coolant.
8. Tires should be mounted on rims with
special equipment, only by professionals.
9. Keep the specified tire pressure to ensure
driving safety.
10. Elevate the vehicle and place a suitable
stand under the frame when removing the
wheels. Be sure to re-tighten the wheel nuts
to the specified torque.
