Periodic Service
6-7
■
Checking engine start system
CAUTION
TO avoid personal injury
Do not allow anyone near the vehicle while
testing.
If the vehicle does not pass the test, do not
operate the vehicle.
◆
Preparation before testing
1.
Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆
Test gear shift range lever safety switch
1. Sit on the operators seat.
2.
Shift the gear shift range lever to: “L”, “H”, or
REVERSE position.
3.
Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for this
service.
①
Range gear shift lever
①
accelerator pedal
■
Checking wheel bolt torque
CAUTION
To avoid personal injury
Never operate vehicle with a loose wheel
bolts.
Any time the bolts are loosened they
should be retightened to the specified
torque.
Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when new if
they are loose tighten them as follows:
①
Torque wheel bolts to 75 to 90 N.m
■
Cleaning air cleaner primary element
1. Remove the seats.
2. Remove the Engine cover
