Troubleshooting
10-4
MACHINE TROUBLESHOOTING
Trouble
Cause
Countermeasure
Gear Shift will not shift
into gear
High idling speed of engine
Replace throttle cable;
Replace throttle petal
Replace the throttle
High rotary speed for clutch
connection.
Replace the junior clutch spring;
Replace the primary clutch.
Gear shift connection is not
adjusted properly
Put the gearshift rod into the
position of “N”.
Put the gearshift arm of engine
into ”N”.
Adjust the stay wire and the bolt.
Lock tightly.
Gear abrasion
Replace the gears
Transmission noise
Misaligned clearance for the
inner and outside gears of
transmission shaft
Replace the gears
Misalignment of transmission
gears.
Replace the gears
Incorrect connection of gear
end face
Replace the gears
Less vehicle power
Parking brake
Loosen the lay-up rod
Hydraulic calipers for disc
brakes are stuck closed
Contact the dealer.
CVT transmission sliding
Removing the grease for the
clutch.
Replace CVT transmission belt
Replace the clutch.
No brakes or brake
noise
Less brake oil
Check the braking oil level
Air inside the braking system.
Contact the dealer.
Brake discs abrasion
Contact the dealer.
Assembling bolt of disc plate
loose
Lock tightly
Assembling bolt for disc brake
clippers loose
Lock tightly
If you have any questions, consult your local dealer.