Electric Power Steering System
8-13
In addition, it can also reduce the steering
system’s mechanical and electrical components’
load, which helps in obtaining reliable function
and long service life.
■
EPS system Periodic maintenance
For primary use after 50 hours, adjust EPS
system part of parameters according to the
steering system’s clearance variation and
chassis changes.
Please go to the dealer for alignment.
For every 100 hours using time, according to the
steering system and the chassis changes, adjust
EPS system relevant parameters.
CAUTION
Before adjusting ECU, please check the
clearance of mechanical parts first and adjust
four wheels position of UTV.
EPS
SYSTEM
PARAMETER
TABLE
■
EPS system basic technical parameters
■
EPS system working conditions
1. Working environment temperature
:
-40
℃
~+
85
℃
2. Working voltage
:
(9
~
16V) DC
3. The seal type
:
IP65
4. Input shaft rotation angle
:
large than
±1.25rmp
5. Wheel rotation speed
:
10round/min
~
15round/min
■
Motor assy basic parameters
Type: DC permanent magnet control motor
Rated working time: 3 min/per time
Rated power
:
170W(nominal value)
Rated operational voltage: 12V DC
Rated
motor
revolving
speed
:
(
1050r±300r
)
/min
Rated operational current
:
30A±3A
Rated output torque
:
1.6N·m±0.16N·m