OPERATING THE VEHICLE 7-2
①
Seat belt
2. Selecting light switch position.
■
Head Light Switch
Turn on the key switch and toggle the head light
switch to the “ON” position.
Toggle
the head light switch to the “OFF” position
to turn off the head light.
①
Head light switch
②
Head
lights “OFF”
③
Low Beam On
④
High Beam On
⑤
4WD button
⑥
2WD button
NOTE
:
Turning the head light switch to the “ON” position
causes the following lamps to light simultaneously.
1. Tail lights (lamps at the rear of the vehicle)
2. The instrument panel illuminates.
■
Hazard Light Switch
[If equipped]
Press the top half of the hazard light switch, the
hazard lights flash along with the indicator on the
instrument panel. Press the bottom half of the
hazard light switch to turn off the hazard lights.
Note:
The hazard light switch will operate when the
key switch is in the “ON” or “OFF” position.
Keeping
the switch “ON” causes the battery
voltage to run down.
■
Turn Signal Light Switch
[If equipped]
To indicate a right turn, push on the lower half of
the turn toggle switch.
To indicate a left turn, push on the upper half of the
turn toggle switch.
When the left or right signal is activated, the
indicated turning light will flash and the other will
stay on.
The indicator lamp at the instrument panel also
flashes indicating the direction of the turn.
NOTE:
The turn signal light switch only operates
when the key switch is in the “ON” position.
If the hazard light switch is pressed to the “ON”
position while the turn signal is activated, the
indicated turning light will flash and other will
stay on.
Be sure to return switch to center position after
turning.
Summary of Contents for STRIKE 1000
