STORAGE 12-2
REMOVING THE VEHICLE FROM
STORAGE
1. Check the tire air pressure and inflate the tires
if they are low.
2. Before installing the battery, be sure it is fully
charged.
3. Check to see if the fan works.
4. Check all fluid levels (engine oil, transmission
oil, engine coolant, transmission coolant and
any attached implements).
5. Start the engine. Observe all gauges. If all
gauges are functioning properly and reading
normal, move the vehicle outside. Once
outside, park the vehicle and let the engine
idle for at least five minutes. Shut the engine
off and work around vehicle and make a visual
inspection looking for evidence of oil or water
leaks.
6). With the engine fully warm up, release the
parking brake and test the brakes for proper
adjustment as you move forward. Adjust the
brake as necessary.
Summary of Contents for STRIKE 1000
