Air Rower
ASSEMBLING THE SADDLE AND SADDLE COVER
STEP ONE: Remove the two pre-mounted screws (C2) and washers (C3) from the slide track (F).
STEP TWO: Remove the four pre-mounted screws (D8) from the saddle (D).
STEP THREE: Remove the four pre-mounted screws (D2) from the saddle holder (D7).
STEP FOUR: Use two screws (C2) and the washer (C3) to attach D the rear stabilizer (C)
to the slide track (F).
STEP FIVE: Fit the saddle (D) on to the saddle holder (D7)
with four screws (D8).
STEP SIX: Fit the saddle cover (E) on to the D7 saddle holder (D7)
with four screws (D2).
ASSEMBLING THE SLIDE TRACK TO THE SHAFT BASE
STEP ONE: Remove six pre-mounted screws (F6) and washer (F7) from the main frame (A).
STEP TWO: Push down the grip (A74), let the shaft base (E1) rotate to upside. (VIEW A)
STEP THREE: Fit the slide track (F) to the shaft base (E1) by six screws (F6) and washer (F7).
FIGURE 3
FIGURE 4
Air Rower Booklet.indd 4
Air Rower Booklet.indd 4
02/09/2020 13:11
02/09/2020 13:11