English
- 24 -
Programme
Select
Programme
by pressing
a
or
b
button.
By pressing
_
/
`
button, you can select the
program number. You can also enter a number
using the numeric buttons on the remote
control. There are 100 program storage
between 0 and 99.
Band
Select
Band
by pressing
a
or
b
button.
By pressing
_
/
`
button, you can change the
channel type to
C
or
S
.
Channel
Select
Channel
by pressing
a
or
b
button.
Use
_
/
`
buttons to change the channel
number. You can also enter a number using
the numeric buttons on the remote control.
Standard
Select
Standard
by pressing
a
or
b
button.
Use
_
/
`
button to change the standard to
B/G,
D/K, I
or
L/L'
.
Colour System
Select
Colour System
by pressing
a
or
b
button.
Use
_
/
`
button to change the colour system to
PAL, SECAM
or
AUTO
.
Search
Select
Search
by pressing
a
or
b
button.
Press
_
/
`
button to start search. The search
will stop when a signal is found.
Note:
If you press the buttons with one-step
moves, a frequency of 0.25 MHz will be
advanced. However if you press the
buttons all at once, it will advance
automatically. To stop searching at a certain
time, you may press
a
or
b
buttons.
VCR Mode
Select
VCR Mode
by pressing
a
or
b
button.
Use
_
/
`
buttons to set
VCR Mode
On or Off.
Hint:
If you want to watch a DVD , then you have
to set this item as Off.
Decoder
You can use this mode to connect any decoder
to your TV.
Select
Decoder
by pressing
a
or
b
button.
Press the
_
/
`
buttons to turn it ON or OFF.
When you switch the decoder setting to OFF, EXT1
output will be muted. In this case,
EXT1
output
will not be available to display video. If it is
switched ON, the
EXT-1
output will be the selected
video source. Any decoder can be connected to
EXT1
to unscramble required video signal.
Hint:
Decoder setting should be stored separately
for each programme.
Store
Select
Store
by pressing
a
or
b
button.
Press
`
or
OK
button to store the settings.
Stored
will be displayed on the screen.
A.P.S.
Select
A.P.S.
by pressing
a
or
b
button.
Press
`
button to enter the A.P.S. menu. A.P.S.
menu appears on the screen:
A.P.S. (Auto Programming System) Country
Press
_
/
`
button to select your country. If you
want to exit from A.P.S. function, press the
TV/
DTV
button. For going back, press
MENU
.
When you press
OK
button for starting APS, all
stored programs will be erased and the
following screen will be displayed.
ENG-1538-1055 UK-17MB21 UK IDTV-(WO SVHS-WO PC)-10051059-50109282-rev1.p65
20.07.2007, 09:39
24
