On Screen Indications
12
On Screen Indications
Whenever a function button (Stop, FF, etc.) is pressed, or when you
change channels, a 4 second OSD appears. The function name or the
channel number (if tuned) are displayed as a large overlay for 2 seconds,
then again for 2 seconds in a smaller overlay.
VCR Status Display
As the Recall button is pressed, the sequence of overlays shown below
will be displayed as long as the arrow appears in the lower right (for about
the first 5 seconds). After the arrow disappears, the overlay displayed will
remain on the TV screen until it is removed by the next press of the Recall
button.
OSD Menu Screen
You only need to press one of the Numeric keys on the remote control.
Each Numeric key is indicated next to the feature displayed on the OSD
Menu. When you select a feature turn to the section in this manual and
read the full description accompanying the instructions there.
