background image

English 

- 53 - 

Some information is displayed on TV screen to

indicate the  current status of the  disc. On  the

display screen you can find the following infor-

mation  lines:

Line 1:

 Time Counter Mode

Line  2:

  Title  Number,  Chapter  Number,  Time

Counter

Line 3:

 Audio Number, Audio Format, Number of

Output Channels, Audio Language

Line 4:

 Subtitle Number & Subtitle Language

Time counter modes can be selected by press-

ing 

TIME

 key consecutively.

The  sequence  for  time  counter  modes  is  as

follows: TITLE ELAPSED, TITLE REMAIN, CHAP-

TER ELAPSED and CHAPTER REMAIN.

• 

If  “TITLE ELAPSED” is displayed, the elapsed

time for the title is being displayed.

• 

If  “TITLE REMAIN” is displayed the remaining

time for the title is being displayed.

• 

If    “CHAPTER  ELAPSED”  is  displayed,  the

elapsed time for the chapter is being displayed.

• 

If  “CHAPTER REMAIN” is displayed, the re-

maining time for the chapter is being displayed.

Pressing the 

TIME 

key for the fifth time closes

display  menu  screen.  “DISPLAY  OFF”  is  dis-

played.

Displaying a scene with a larger and closer

view

The  ‘zoom  in’  function  enables  you  to  take  a

closer look at the scene you are viewing that is

especially an impressive function when you are

seeing science fiction or adventure film.
Press ZOOM during play.

 2X” is displayed on the screen and the pic-

ture is now larger. By pressing 

ZOOM 

key con-

secutively  you  can  reach  “

  3X”,  “

  4X”

modes.

NOTE: 

You can move in the picture, i.e. change

the zoomed location, by using the 

 (Left) 

/

(Right) 

/

 (Down) 

 (Up) 

arrow keys.

To return to normal play
Press ZOOM again.

Displaying / Changing Subtitle Language

It  is  possible  to  change  the  subtitle  language

from the one selected at the initial settings to a

different language, if available.
(This operation works only with discs on which

multiple  subtitle  languages are  recorded.)
Press SUBTITLE during play.
When  no  subtitles  are  recorded  “

”  will  be

displayed instead of the selected language.

Press 

SUBTITLE

 a number of times until the

preferred language is selected.

When this button is pressed once, the first sub-

title recorded on the disc will display. The rest of

the subtitles recorded will display in sequence

for every press of the 

SUBTITLE

 button.

NOTE:

• 

In  some  cases,  the  subtitle  language  is  not

changed immediately to the selected one.

For your convenience:

• 

When the preferred language is not selected

even after pressing the button several times, it

means that the  language  is not  available  on

the disc.

• 

When  the  player  is  restarted  or  the  disc  is

changed,  the  subtitle  selection  is  automati-

cally changed back to the initial settings.

• 

If  a  language  is  selected,  which  is  not  sup-

ported  by  the  disc,  the subtitle language will

automatically be set to the disc’s priority lan-

guage.

• 

Usually a circulation will happen while switch-

ing to another language, that is you can cancel

the subtitle by pressing this button a number

of  times  until  “Subtitle  Off  ”  appears  on  the

screen.

Changing Audio Soundtrack Language

It is possible to change the audio language from

the one selected at the initial settings to a differ-

ent language, if available.
(This operation works only with discs on which

multiple  audio  soundtrack  languages  are  re-

corded, if not prohibited by the DVD.)
Press AUDIO during play.

Press 

AUDIO

  a  number  of  times  until  the

preferred language is selected.

For your convenience:

• 

When the preferred language is not selected

even after pressing the button several times, it

means that the  language  is not  available  on

the disc.

• 

When  the power  is  turned  on  or  the disc  is

removed,  the language  heard is the one  se-

lected at the initial settings. If this language is

not  recorded  on  the  disc,  only the  available

language on the disc will be heard.

Viewing From Another Angle

Some DVD  discs  may  contain  scenes,  which

have been shot simultaneously from a number

of different  angles. For these discs,  the  same

scenes can be viewed from each of these dif-

ferent angles using the ANGLE button.

ENG-02-DVD-22784W-1165UK-MB29-UKIDTV-(DVD7240-X2TSF-WO DIVX)-10057606-50131371.p65

24.09.2008, 15:51

53

Summary of Contents for 22LD3750DU





































































Reviews: