![background image](http://html.mh-extra.com/html/hitachi/26ld5550u/26ld5550u_user-manual_142465029.webp)
29
Troubleshooting table
Please check the following list before requesting service.
Symptom
Possible solution
Page
No picture, no sound
Switch on the set.
Check that the mains power outlet is properly connected.
Select appropriate input mode.
Unplug unit for 1 minute, then plug it back in.
7
11
No reception
Have you tuned in the TV stations?
Press
1
on the remote control.
Connect the aerial.
Make sure the set is ON and not in Standby mode
10
11
The TV switches off with
missing aerial input signal
This is normal.
15 minutes after the aerial signal has disappeared, the set will
change to standby mode.
13
In
menu, the TUNING
option cannot be selected.
The unit is set to AV mode. Press
1
on the remote control.
12
Wrong Colours
Colour and Brightness errors can occur when the viewing angle/
ambient air temperature (see technical specifi cations) are
exceeded.
While viewing a DVB (digital)
channel, there is sound but
no picture.
Some channel offers audio content only. It is normal.
Blocky image or image stops
intermittently.
Check all aerial connections.
Move the aerial away from areas of possible interference.
Try using an aerial booster.
10
Some digital channels cannot
be viewed.
Contact the service provider to subscribe.
“Database empty” message
appears on the screen.
Check all aerial connections and try auto tuning again.
18
The LCD panel is a very high technology product, giving you fi ne picture details. Occasionally, a few nonactive
pixels may appear on the screen as a fi xed point of blue, green or red. Please note that this does not affect the
performance of your product.
•
System
Analogue:
PAL UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L
Digital:
DVB-T (OFDM 2k/8k 16QAM/64QAM)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Preset channels:
Analogue channels (99) + Digital channels (Carrier 200/Service1000)
Frequency Range
Analogue: IreE2~E4, X~Z+2, S1~S10, E5~E12, S11~S41, E21~E69
Digital:
E5~E12, ItaD~H2, Fra1~6, Rus6~12, E21~E69
Power Supply
AC 220-240V, 50/60Hz
Power Consumption:
Operation:
approx. 115W at AC230V, 50Hz
Stand by:
approx. 1W at AC230V, 50Hz
LCD
26.01” TYPE (66.05 cm visible)
TFT low-glass Active Matrix Colour LCD, 1366 x 768 Pixel
HDMI input
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC:
480i/480p/720p/1080i
HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
Output Power
approx. 10W (MAX) x 2
Surrounding temperature
Operation: 5°C ~ 40°C/Storage: –20°C ~ 60°C
Operating Humidity
Less than 80%RH
Dimensions
66.3(W) x 49.8(H) x 21.4(D) cm
Weight (w/o Accessories)
approx. 8.4 kg
Accessories
2 batteries (AA/R6/UM-3)/Remote control unit/AC cord
Weight and dimensions are approximate. Because we continually strive to improve our products we may change
specifi cations and designs without prior notice.
Specifi cations