background image

7

Location of controls

Description of Indicators and Controls

1. Remote sensor
2.

(Standby/Timer/On) indicator:

 The LED indicator lights up red in standby mode, orange in 

standby mode when the timer is activated, and green in the power ON mode.

3. Loudspeakers
4.

(Volume) +/– buttons / 

In Menu: Setting.

5.

(Channel)

/

 buttons:

 Press 

 to change to a higher numbered channel set into memory. 

Press 

 to change to a lower numbered channel set into memory. In Menu: Setting. In Standby: 

Turning on the unit.

6. MENU button:

 To display the menu screen.

7. TV/AV/PC/ENTER button:

 Select input mode for TV/AV/COMPONENT/HDMI/PC. In Menu : Using 

as

ENTER

 button.

8.

 (Power)-key: 

Preparation: Connect power-cable to AC220~240V/50/60Hz.

a)  If standby-LED is red, you may power-off. To power-off, press power-key 1x and release.
 For 

confi rmation, standby-LED will change to dark.

b)  If standby-LED is off, you may power-on. To power-on, press power-key 1x and release.
 For 

confi rmation, standby-LED will change to red and about 1 second later to green.

c)  If the TV is currently working, press power-key 1x and release to power-off.
 For 

confi rmation, standby-LED will change to dark.

 

In power-off-condition, the TV’s power-consumption is approx. 1 Watt.

 

If total disconnection from the mains is required, pls unplug.

4

3

1 2

5

6
7

8

Summary of Contents for 26LD5550U



































Reviews: