Hitachi 32HE2200, Instruction Manual

English

   - 16 -

Auto discard:

 You can set the 

Discard

 type as 

None

, 

Oldest

, 

Longest

 or 

Shortest

. If it is not 

set to 

None

, you can set the 

Unplayed

 option as 

Included

 or 

Excluded

. These options determine 

the preferences for deleting the recordings in order 

to obtain more storage space for ongoing records.

Hard disk information:

 You can view detailed 

information about the USB storage device connected 

to your TV. Highlight and press 

OK

 to see and press 

Back/Return

 to close.

Format Disk: 

If you want to delete all files on the 

connected USB storage device and convert the disk 

format to FAT32, you can use this option. Press 

OK

button while the 

Format Disk

 option is highlighted. 

A menu will appear on the screen, requiring you 

to enter the PIN

(*)

. After you enter the PIN, a 

confirmation message will be displayed. Select 

Yes

and press 

OK

 to start formatting the USB storage 

device. Select 

No

 and press 

OK

 to cancel. 

(*)

 Default PIN could have been set to 

0000

 or 

1234

. If you 

have defined the PIN(is requested depending on the country 

selection) during the 

First Time Installation

 use the PIN 

that you have defined.

IMPORTANT:

 Formatting your USB drive will erase 

ALL the data on it and it’s file system will be converted  

to FAT32. In most cases operation errors will be fixed 

after a format but you will lose ALL your data.
If “

USB disk writing speed too slow to record

” 

message is displayed on the screen while starting a 

recording, try restarting the recording. If you still get 

the same error, it is possible that your USB disk does 

not meet the speed requirements. Try connecting 

another USB disk.

Media Browser

You can play back music and movie files and display 

photo files stored on a USB storage device by 

connecting it to your TV. Connect a USB storage device 

to one of the USB inputs located on the side of the TV. 
After connecting a USB storage device to your TV 

Media Browser

 menu will be displayed on the screen. 

You can access the content of the connected USB 

device any time later from the 

Sources

 menu. Select 

the related USB input option from this menu and press 

OK

. You can also press the 

Source

 button on the 

remote and then select your USB storage device from 

the list of sources. Then select the file of your choice 

and press 

OK

 to display or play it back.

You can set your 

Media

Browser

 preferences by 

using the 

Settings

 menu. 

Settings

 menu can be 

accessed via the information bar which is displayed 

on the bottom of the screen while playing back a video 

file or displaying a picture file. Press the 

Info

 button 

if the information bar has disappeared, highlight the 

gear wheel symbol positioned on the right side of 

the information bar and press 

OK

. 

Picture Settings

, 

Sound Settings

, 

Media Browser Settings

 and 

Options

 menus will be available. The content of the 

Settings

 menu may change according to the type of 

the currently open media file. Only 

Sound Settings 

menu will be available while playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate 

All files in the list will be 

continuously played in 

original order

Start playback and activate 

The same file will be 

played continuously 

(repeat)

Start playback and activate 

All files in the list will be 

played once in random 

order

Start playback and activate 

, 

All files in the list will be 

continuously played in 

the same random order

To use the functions on the information bar highlight the 

symbol of the function and press 

OK

. To change the 

status of a function highlight the symbol of the function 

and press 

OK

 as much as needed. If the symbol is 

marked with a red cross, that means it is deactivated.

FollowMe TV

With your mobile device you can stream the current 

broadcast from your smart TV using the 

FollowMe 

TV

 feature. Install the appropriate Smart Center 

application to your mobile device. Start the application. 
For further information on using this feature refer to 

the instructions of the application you use.

Note:

  Depending  on  model,  your  TV  may  not  support  this 

function. The application may not be compatible with all mobile 

devices. UHD (4K, Ultra HD) channels are not supported and 

both of the devices must be connected to the same network.

CEC

This function allows to control the CEC-enabled 

devices, that are connected through HDMI ports by 

using the remote control of the TV.
The 

CEC

 option in the

 Settings>System>Device 

Settings

 menu should be set as 

Enabled

 at first. Press 

the 

Source

 button and select the HDMI input of the 

connected CEC device from the 

Sources List

 menu. 

When new CEC source device is connected, it will be 

listed in source menu with its own name instead of 

the connected HDMI ports name(such as DVD Player, 

Recorder 1 etc.).
The TV remote is automatically able to perform the 

main functions after the connected HDMI source has 

been selected. To terminate this operation and control 

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the 

related option under the

 Settings>System>Device 

Settings 

menu accordingly.