Hitachi 32HE2200, Instruction Manual

English

   - 21 -

Network Menu Content

Network Type

Disable the network connection or change the connection type.

Scan Wireless 

Networks

Start a search for wireless networks. This option will be available if the 

Network Type

is set as 

Wireless Device

.

Press WPS on your 

wifi router

If your modem/router device has WPS, you can directly connect to it using this option. 

Highlight this option and press 

OK

. Go to your modem/router device and press the 

WPS button on it to make the connection. This option will be available if the 

Network 

Type

 is set as 

Wireless Device

.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on 

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV. 

Wake On

Enable or disable this feature by setting it as 

On

 or 

Off

.

Note:

 A wireless LAN adaptor (WLAN USB dongle) is required to use wireless network features. The wireless adaptor is not supplied with the 

unit, it can be purchased separately. For more information contact your local dealer or retail outlet where you bought your TV. 

For detailed 

information on the options of this menu refer to the 

Connectivity

 section.

Installation Menu Content

Fransat

Displays Fransat options.

Parental Control 

Displays parental control options. Enter the PIN number you have defined in the initial 

installation to view current settings.

System 

Information

Displays system information.

Reception 

Information 

Displays current satellite reception information.

CAS-Module

Displays current CAS module information.

Upgrade 

Displays software upgrade options. 

Automatic channel 

scan (Retune)

Displays automatic tuning options. 

D. Aerial:

 Searches and stores aerial DVB stations. 

D. Cable:

 Searches and stores cable DVB stations. 

Analogue:

 Searches and stores 

analogue stations. 

Satellite:

 Searches and stores satellite stations.

Manual channel 

scan

This feature can be used for direct broadcast entry.

Network channel 

scan

Searches for the linked channels in the broadcast system. 

D. Aerial:

 Searches for aerial 

network channels. 

D. Cable: 

Searches for cable network channels. 

Satellite: 

Searches 

for satellite network channels. 

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available 

if no analogue channels are stored and if currently watched channel is not an analogue 

channel.

Satellite Settings

Displays satellite settings. 

Satellite list:

 Displays available satellites. You can 

Add

, 

Delete

 satellites or 

Edit

 satellite settings on the list. 

Antenna installation:

 You can 

change satellite antenna settings and/or start a satellite scan. 

Satellite Channel Table:

You can upload or download satellite channel table data using the related options.

Installation Settings 

(optional)

Displays installation settings menu. 

Standby Search (*): 

Your TV will search for new or 

missing channels while in standby. Any new found broadcasts will be shown. 

Dynamic 

Channel Update(*):

 If this option is set as Enabled, the changes on the broadcasts 

such as frequency, channel name, subtitle language etc., will be applied automatically 

while watching.

(*) Availability depends on model.