English
- 29 -
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original shape.
14:9 Zoom
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
The top and bottom of the picture are slightly cut off.
Freeze Picture
You can freeze the picture on the screen by pressing
the
OK
button.
Note
: This feature will be unavailable to be used
while watching DTV, PC, YPbPr and HDMI
sources.
Teletext
You can display Teletext information on your TV. Each
channel which broadcasts teletext, transmits a page
with information on how to use its teletext system
(usually page 100). Depending on the TV channel,
teletext is transmitted in different systems.The colours
used in the options line correspond with the colour
buttons of your remote control.
Ensure that the TV is receiving a good signal, or
some text errors may occur.
When four coloured items appear at the bottom of
the text page,Fasttext is available.Fasttext allows
you to access pages quickly and easily.Press the
corresponding coloured button to access the page.
Special Teletext Functions
To Display a page of text.
The view text services press
. To return normal
viewing press again.Programmes cannot be changed
until text is cancelled.
To select a page, press the number buttons or pro-
gram buttons (P+, P-).
To select index page, press
button.
To select superimposed over the programme on the
screen, press
.
Press
once to enlarge top half of the page,press
again to enlarge the bottom half of the page.Press
again to revert normal size.
To discover solutions on quiz and games press
At times it is convenient to hold a page of text.Press
to hold a page. The page will be held on screen
until the button pressed again.
To select subcode pages press
.Subcode
pages are subsections of long Teletext pages that
can only be displayed on the screen one section at
a time.
Time information will be displayed on screen after
pressing
button.If the programme does not
have teletext transmission, no information will be
displayed.
When
button is pressed while in teletext mode,
the screen will be splitted into two windows, one
displaying the teletext and the other displaying the
current channel. Press the
button or
button to exit from teletext.
To exit text press
.
Note:
If the signal becomes insufficient, the teletext
mode will be quitted.
