- 18 -
press the OK button to display TV Setup
menu screen.
Detailed information about Sound, Picture
and Feature menus are in AnalogueTV
Menu System section on page 18.
Common Interface
Press the
button to display the Main
Menu and use the or button to highlight
the
Common Interface
line and press
the
OK button.
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module
(CAM) and the Viewing card by subscribing
to a pay channel company, then insert those
to the Television using the following proce-
dure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at
the left-hand side of the TV (from front
view).
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
3. Connect the TV to the mains supply,
switch on and then wait for few moments
until the card is activated.
Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing the
SELECT button. (CAM set up menu is not
displayed when it is not required.)
To see the viewing contract information:
Enter IDTV; press the
button, then high-
light
Common Interface
and press the OK
button.
When no module is inserted,
No Common
Interface module detected
message ap-
pears on the screen.
Refer to the module instruction manual for
details of the settings.
Analogue TV Menu System
Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the
button to enter the menu.
Press
_
/
`
button to select a menu title and
then
a
/
b
button to select a menu item and
_
/
`
or
OK
button to enter the menu item.
Press the
button to exit the menu.
Press the
button to return to the previous
menu.
