background image

English

   - 11 -

record the next event on the EPG. In this case, an 

OSD will be displayed, indicating the programmed 

events for recording. Press 

Stop

 button to cancel 

instant recording. 
You can not switch broadcasts or view the media 

browser during the recording mode. While recording 

a programme or during the timeshifting, a warning 

message appears on the screen if your USB device 

speed is not sufficient.

Media Browser Menu

You  can  play  photo,  music  and  movie  files  stored 

on a USB disk by connecting it to your TV. Connect 

a USB disk to one of the USB inputs located on the 

side of the TV. Pressing the 

Menu

 button while in 

the 

Media Browser

 mode will access the 

Picture

Sound

 and 

Settings

 menu options. Pressing the 

Menu

 button again will exit from this screen.

 

You 

can set your 

Media

 

Browser

 preferences by using 

the 

Settings

 Menu.

Loop/Shuffle Mode Operation

Start playback with the 

Play 

button and activate 

All files in the list will be 

continuously played in original 

order

Start playback with the 

OK 

button and activate 

The same file will be played 

continuously (repeat)

Start playback with the 

Play

 

button and activate 

All files in the list will be 

played once in random order

Start playback with the 

Play

 

button and activate 

All files in the list will be 

continuously played in the 

same random order.

Recording a Programme

IMPORTANT: 

When using a new USB hard disk drive, 

it is recommended that you first format the disk using 

your TV’s “

Format Disk

” option.

To record a programme, you should first connect a 

USB disk to your TV while the TV is switched off. You 

should then switch on the TV to enable the recording 

feature.
To use recording your USB drive should have 2 GB 

free space and be USB 2.0 compatible. If the USB 

drive is not compatible an error message will be 

displayed.
To record long duration programmes such as movies, 

it is recommended to use USB Hard disk drives 

(HDD’s).
Recorded programmes are saved into the connected 

USB disk. If desired, you can store/copy recordings 

onto  a  computer;  however,  these  files  will  not  be 

available to be played on a computer. You can play 

the recordings only via your TV.
Lip Sync delay may occur during the timeshifting. 

Radio record is supported. The TV can record 

programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 

If the writing speed of the connected USB disk is not 

sufficient, the recording may fail and the timeshifting 

feature may not be available.
It is recommended to use USB hard disk drives for 

recording HD programmes.
Do not plug out the USB/HDD during a recording. This 

may harm the connected USB/HDD.
If the AC cord is unplugged while there is an active 

USB-recording timer setting, it will be cancelled.
Multipartition support is available. A maximum of two 

different partitions are supported. The first partition of 

the USB disk is used for PVR ready features. It also 

must be formatted as the primary partition to be used 

for the PVR ready features.
Some stream packets may not be recorded because 

of signal problems, as a result sometimes videos may  

freeze during playback.
Record, Play, Pause, Display (for PlayListDialog) keys 

can not be used when teletext is on. If a recording starts 

from timer when teletext is on, teletext is automatically 

turned off. Also teletext usage is disabled when there 

is an ongoing recording or playback.

Watching Recorded Programmes 

Select 

Recordings 

from the 

Media Browse

r menu. 

Select a recorded item from the list (if previously 

recorded). Press the 

OK

 button to view the 

Play 

Options

. Select an option then press 

OK

 button.

Note: Viewing main menu and menu items will not be 

available during the playback.

Press the 

Stop

 button to stop a playback and return 

to the 

Recordings

.

Slow Forward

If you press 

Pause

 button while watching recorded 

programmes, the slow forward feature will be 

available. You can use 

Rapid advance

 button to 

slow forward. Pressing 

Rapid advance

 button 

consecutively will change slow forwarding speed.

Recording Configuration

Select the 

Recording  Configuration 

item in the 

Media Browser>Settings 

menu  to  configure  the 

recording settings. 

Format Disk: 

You can use the 

Format Disk 

feature 

for formatting the connected USB disk. Your pin is 

required to use the 

Format Disk 

feature.

Note: 

Default PIN can be set to 

0000 

or 

1234. If you have 

defined  the  PIN(is  requested  depending  on  the  country 

selection) during the 

First Time Installation 

use the PIN 

that you have defined.

IMPORTANT: 

Formatting your USB drive will erase 

ALL the data on it and it’s file system will be converted 

to FAT32. In most cases operation errors will be fixed 

after a format but you will lose ALL your data.
If “USB disk writing speed too slow to record” message 

is displayed on the screen while starting a recording, 

Summary of Contents for 43HBT62




























Reviews: