AUDIO
- 48 -
Use the CURSOR buttons to select and adjust VOLUME and BALANCE.
Press MENU to exit.
WIRELESS MODE
This feature allows you to choose between 3 possible variable audio outputs for a
separate set of wireless speakers or another stereo amplifier. The audio output may be
either MAIN, PIP or REAR. This feature also allows you to turn the interior speaker on
or off, as well as adjust PIP volume if you have chosen PIP as your variable audio input.
Use the CURSOR buttons to change and adjust selections.
Press MENU to exit.
MAIN Mode
When set to MAIN mode, your wireless speakers will play the same audio program as
played on your TV. When set to this mode, you may choose to turn the televisions'
internal speakers on or off. Also, the volume of your wireless speakers will be
controlled by the TV volume control.
PIP Mode
When set to PIP mode, your wireless speakers will play the PIP sub-picture audio
program. The volume of your wireless speakers will now be controlled by the PIP VOL.
control, which may be varied from 01 (min.) to 33 (max.). If no sub-picture is displayed,
the wireless speakers will play the main channel audio program, with the volume still
controlled by the PIP VOL. control.
REAR Mode
When set to REAR mode, your wireless speakers will play the Surround audio program.
The volume of your wireless speakers will be controlled by the TV volume control,
dependent upon the amount of REAR selected from SURROUND mode. (See pages
42, 43)
