-3-
Fig. 5
5. Removal of the gear holder
(1) Pull out Connecting Piece (A)
[33]
and Needle Bearing
[34]
from the Gear
[36]
.
(2) Remove the Retaining Ring for D7 Shaft
[35]
from the tip of the spindle.
(3) Remove the Gear
[36]
, Balance Weight
[37]
, Orbital Cam
[38]
and Washer (A)
[23]
in this order.
(4) Remove the Motor
[13]
press-fitted in the Gear Holder Ass’y
[47]
.
(5) Remove the Retaining Ring (E-type) for D5 Shaft
[39]
, Change Knob
[42]
, Spring (C)
[27]
, and Steel
Ball 5/32
[41]
.
NOTE: Be careful not to lose Spring (C) [27] and Steel Ball 5/32 [41].
(6) Pull out the Needle Roller D4 x 24
[40]
press-fitted in the Gear Holder Ass’y
[47]
. Remove the Roller
Holder
[49]
and Needle Roller
[48]
.
[33]
[39]
[36]
[23]
[13]
[34]
[35]
[38]
[27]
[46]
[37]
[42]
[41]
[47]
[49]
[40]
[48]