REAR PANEL JACKS
- 14 -
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the
stereo can be controlled by the television's main volume. Use these jacks for the SURROUND Left and Right
channels. (see page 20)
(6)
REAR SPEAKER Terminals
These terminals are used to connect external speaker, which are used for the surround sound feature. The volume level is
controlled by the television's main volume and also by an independent rear volume feature found in the THEATER-
SURROUND menu. Use speaker with 8-Ohm impedance only.pg. 12 REAR PANEL JACKS
(7)
S-VIDEO INPUTS 1 and 2
Inputs 1 and 2 provide S-Video (Super Video) jacks for connecting equipment with S-VIDEO output capability.
(8)
Component: Y-CB-CR INPUT 2
INPUT 2 provides Y-CB-CR jacks for connecting equipment with this capability, such as a DVD.
NOTES:
DO NOT connect standard VIDEO or S-VIDEO to INPUT 2 when using Y-CB-CR input.
When using the Y-CB-CR input jacks, connect your components audio output to the TV's INPUT 2 Left and Right
Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to
the TV's CB input and the components R-Y output to the TV's CR input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-CB-CR inputs. (See
pages 54 and 55.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-CB-CR
jacks.
When using the Y-CB-CR jacks, INPUT 2 will be viewed as a blank PIP sub-picture. (see page 26)
(9)
SUB WOOFER
This jack provides variable audio output to a sub-woofer accessory. With this connection, the audio can be
controlled by the television's main volume and also by an independent sub-woofer feature found in the THEATER-
SUB WOOFER menu.
REAR PANEL JACKS
