SET UP
- 54 -
Use THUMB STICK
or
to highlight function and press down on the THUMB STICK to set ON or OFF.
When CHANNEL is turned on, the picture and sound for the chosen channel will be blocked out.
When VIDEO LOCK is turned on, the picture and sound for all video inputs will be blocked out. To lock
the video inputs, you must be tuned to any video input.
When QUICK LOCK is turned on, the picture and sound for channels 3, 4 on both ANT A/B and all video
inputs will be blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the front panel will be deactivated, except the
POWER button.
When TV TIME OUT is turned on, you can set the BEGIN and END times and the TV cannot be viewed
during that time period. (Set clock first). Use THUMB STICK
or
to highlight ONCE (TV will time out one
time only), DAILY (TV will time out every day), WEEKLY (TV will time out one time a week) or OFF (to disable this
function) and then press down on THUMB STICK to SELECT your choice.
MOVIE/TV RATINGS are explained in detail in the Parental Control Movie/TV Ratings Reference Guide.
To change the secret code number, select CHANGE SECRET CODE. Enter a new four digit dey number you
prefer.
If you forget your secret code, use the factory code 7777 to erase your key number. This will reset the key
number back to the factory preset 0000.
Press EXIT to quit menu or THUMB STICK
to return to the previous menu.
NOTE:
1. If ANT A and ANT B are in the same SIGNAL SOURCE mode (see page 39), when a channel is locked, it is locked on
both antenna inputs.
2. When using TV TIME OUT make sure the clock is set (see page 43).
4 EVENT PROG.
This function will automatically turn the TV on and off, one time only, every day or once a week.
