Hitachi 55HK5600, Instruction Manual

English

   - 17 -

Timeshift Recording

Press 

Pause

 button while watching a broadcast to 

activate timeshifting mode. In timeshifting mode, the 

programme is paused and simultaneously recorded to 

the connected USB disk.
Press 

Play

 button again to resume the paused 

programme from where you stopped. Press the 

Stop

button to stop timeshift recording and return to the 

live broadcast.
Timeshift cannot be used while in radio mode.
You can use the timeshift rewind feature after resuming 

normal playback or fast forward option.

Instant Recording

Press 

Record

 button to start recording an event 

instantly while watching a programme. You can press 

Record

 button on the remote control again to record 

the next event after selecting the next programme from 

within the electronic programme guide. Press 

Stop

button to cancel instant recording. 
You can not switch broadcasts or view the media browser 

during the recording mode. While recording a programme 

or during the timeshifting, a warning message appears 

on the screen if your USB device speed is not sufficient.

Watching Recorded Programmes 

Select 

Recordings 

from the 

TV

 menu. Select a 

recorded item from the list (if previously recorded). 

Press the 

OK

 button to view the 

Options 

menu. Select 

an option then press 

OK

 button.

Note:

 Viewing main menu and menu items will not be available 

during the playback.

Press the 

Stop

 button to stop a playback and return 

to the 

Recordings

.

Slow Forward

If you press 

Pause

 button while watching recorded 

programmes, the slow forward feature will be available. 

You can use 

Fast Forward

 button to slow forward. 

Pressing 

Fast Forward

 button consecutively will 

change slow forwarding speed.

Recording Configuration

Select the 

Settings

 tab in the 

TV>Recordings

 menu 

to configure the recording settings and press 

OK

.

Format Disk:

 You can use the 

Format Disk

 option for 

formatting the connected USB disk. Your PIN will be 

required to use the 

Format Disk

 feature.

Note:

 Default PIN could have been set to 

0000

 or 

1234

. If you 

have defined the PIN(is requested depending on the country 

selection) during the 

First Time Installation

 use the PIN that 

you have defined.

IMPORTANT:

 Formatting your USB drive will erase 

ALL the data on it and it’s file system will be converted  

to FAT32. In most cases operation errors will be fixed 

after a format but you will lose ALL your data.
If “

USB disk writing speed too slow to record

” 

message is displayed on the screen while starting a 

recording, try restarting the recording. If you still get 

the same error, it is possible that your USB disk does 

not meet the speed requirements. Try connecting 

another USB disk.

Media Browser

You can play back music and movie files and display 

photo files stored on a USB storage device by 

connecting it to your TV. Connect a USB storage device 

to one of the USB inputs located on the side of the TV. 
After connecting a USB storage device to your TV 

Media Browser

 menu will be displayed on the screen. 

You can access the content of the connected USB 

device any time later from the 

Sources

 menu. Select 

the related USB input option from this menu and press 

OK

. Then select the file of your choice and press 

OK

to display or play it back.
You can set your 

Media

Browser

 preferences by using 

the 

Settings

 menu. 

Settings

 menu can be accessed 

via the information bar which is displayed on the 

bottom of the screen when pressed the 

Info

 button 

while playing back a video file or displaying a picture 

file. Press the 

Info

 button, highlight the gear wheel 

symbol positioned on the right side of the information 

bar and press 

OK

. 

Picture Settings

, 

Sound Settings

, 

Media Browser Settings

 and 

Options

 menus will be 

available. The contents of these menus may change 

according to the type of the currently open media file. 

Only 

Sound Settings 

menu will be available while 

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate 

All files in the list will be 

continuously played in 

original order

Start playback and activate 

The same file will be 

played continuously 

(repeat)

Start playback and activate 

All files in the list will be 

played once in random 

order

Start playback and activate 

, 

All files in the list will be 

continuously played in 

the same random order

To use the functions on the information bar highlight the 

symbol of the function and press 

OK

. To change the 

status of a function highlight the symbol of the function 

and press 

OK

 as much as needed. If the symbol is 

marked with a red cross, that means it is deactivated.